Full Information about Apparatus
for the Rhythmic Gymnastics is on this page.
It may be made of hemp or a synthetic material which retains the qualities of lightness and suppleness. Its length is in proportion to the size of the gymnast. When the middle of the rope is held down by the feet, both ends should reach the gymnasts' armpits. One or two knots at each end are for keeping hold of the rope while doing the routine. At the ends (to the exclusion of all other parts of the rope) an anti-slip material, either coloured or neutral may cover a maximum of 10 cm (3.94 in). The rope must be colored, either all or partially. It may be either of a uniform diameter or be progressively thicker in the center provided that this thickening is of the same material as the rope. The fundamental requirements of a rope routine include leaps and skipping. Other elements include swings, throws, circles, rotations and figures of eight. In 2011, the FIGdecided to nullify the use of rope in rhythmic gymnastic competitions.
A hoop may be made of plastic or wood, provided that it retains its shape during the routine. The interior diameter is from 51 to 90 cm, and the hoop must weigh a minimum of 300g. The hoop may be of a natural color or be partially or fully covered by one or several colors, and it may be covered with adhesive tape either of the same or different color as the hoop. Fundamental requirements of a hoop routine include rotation around the hand or body and rolling, as well as swings, circles, throws, and passes through and over the hoop. The routines in hoop involves mastery in both apparatus handling and body difficulty like leaps, jumps and pivots.
It is made of either rubber or synthetic material (pliable plastic) provided it possesses the same elasticity as rubber. It is from 18 to 20 cm in diameter and must have a minimum weight of 400g. The ball can be of any color. The ball should rest in the gymnast's hand and not rest against the wrist or be able to be grasped. Fundamental elements of a ball routine include throwing, bouncing or rolling. The gymnast must use both hands and work on the whole floor area whilst showing continuous flowing movement. The ball is to emphasize the gymnasts flowing lines and body difficulty.
Multi-piece clubs are the most popular clubs. The club is built along an internal rod, providing a base on which a handle made of polyolefin plastic is wrapped, providing an airspace between it and the internal rod. This airspace provides flex, cushioning impact, making the club softer on the hands. Foam ends and knobs further cushion the club. Multi-piece clubs are made in both a thin European style or larger bodied American style and in various lengths, generally ranging from 19 to 21 inches (480 to 530 mm). The handles and bodies are typically wrapped with decorative plastics and tapes. The skills involved are apparatus mastery and body elements, Clubs are thrown from alternate hands; each passes underneath the other clubs and is caught in the opposite hand to the one from which it was thrown. At its simplest, each club rotates once per throw, the handle moving down and away from the throwing hand at first. However, double and triple spins are frequently performed, allowing the club to be thrown higher for more advanced patterns and to allow tricks such as 360s to be performed underneath.
It is made of satin or another similar material cloth of any color, it may be multi-colored and have designs on it. The ribbon itself must be at least 35g (1 oz), 4–6 cm (1.6–2.4") in width and have a minimum length of 6m (20') for seniors and 5m (16.25') for juniors. The ribbon must be in one piece. The end that is attached to the stick is doubled for a maximum length of 1m (3'). This is stitched down both sides. At the top, a very thin reinforcement or rows of machine stitching for a maximum length of 5 cm is authorized. This extremity may end in a strap, or have an eyelet (a small hole, edged with buttonhole stitch or a metal circle), to permit attaching the ribbon. The ribbon is fixed to the stick by means of a supple attachment such as thread, nylon cord, or a series of articulated rings. The attachment has a maximum length of 7 cm (2.8"), not counting the strap or metal ring at the end of the stick where it will be fastened. Compulsory elements for the ribbon include flicks, circles, snakes and spirals, and throws. It requires a high degree of co-ordination to form the spirals and circles as any knots which may accidentally form in the ribbon are penalized. During a ribbon routine, large, smooth and flowing movements are looked for.